This DeWalt DCG415W1 20V Max Power Detect Grinder Kit is a top - notch toolset for all your grinding needs. Included in the kit are: a 20V MAX XR Brushless 4.5 - 5 - inch grinder (DCG514), a high - capacity 20V MAX Lithium Ion 8.0Ah battery (DCB208), a charger, a 5 - inch Type 27 guard, a side handle, a wrench, inner and outer flanges, a convenient kit bag, and an owner's manual. The grinder comes with amazing features. It uses Power Detect technology to work at its best with high - capacity XR batteries, delivering up to 40% more power. The Kickback Brake is a safety hero. When there's a pinch, stall, or bind - up, it kicks in with full force to stop the wheel fast and shut off the grinder, reducing the risk of damage and injury. The Anti - Rotation E - CLUTCH system senses the tool's motion and shuts it down during bind - ups, minimizing sudden torque reaction compared to regular clutches. And the E - Switch Protection makes sure that in case of a power outage or unexpected shutdown, you just cycle the trigger switch (off then on) to restart the tool. Specifications: It runs on 20V, has a max RPM of 9000, a brushless motor, and is cordless. The arbor diameter is 5/8 inches, it has a 2 - position side handle, a charge time of 0.75 hours, a wheel diameter of 4.5 inches, a length of 12.2 inches, a width of 9.8 inches, and weighs 3.8 lbs.
Using this DeWalt grinder kit is a breeze. First, charge the 20V MAX Lithium Ion 8.0Ah battery using the included charger. It takes about 0.75 hours to fully charge. Once charged, insert the battery into the grinder. Attach the side handle to get a comfortable grip. You can adjust the handle to one of the two positions according to your preference. Before starting work, make sure the 5 - inch Type 27 guard is properly installed to protect you from sparks and debris. When using the grinder, always wear safety goggles and gloves. The grinder has a Power Detect feature that works great with high - capacity XR batteries, giving you more power. But remember, if you encounter a pinch, stall, or bind - up, the Kickback Brake will activate to stop the wheel quickly and shut off the grinder. This is a safety measure to protect you and the tool. Also, the Anti - Rotation E - CLUTCH system will shut down the tool in bind - up situations. In case of a power outage or unexpected shutdown, just turn the trigger switch off and then on to restart the tool. For maintenance, after each use, clean the grinder to remove dust and debris. Check the battery regularly for any signs of damage. Store the grinder and battery in a dry place. If you need to replace parts like the wheel or flanges, use the included wrench and follow the instructions in the owner's manual.
