The DeWalt DCE151TD1 20V MAX* XR® Cordless Cable Stripper is a top - notch powered tool designed for hassle - free and consistent stripping of THHN and XHHW cables up to 4 feet without using a knife. This cordless wonder can handle both copper and aluminum cables, with a size range from 6 AWG to 750MCM for copper and 900MCM for aluminum when you use the right bushing. DEWALT provides a reference chart in the manual and below to help you pick the correct bushing. It's a good idea to also select the bushing sizes above and below the recommended one due to cable brand variances.
What's in the kit? You'll get a DCE151 Cable Stripper, a 2 Ah DCB203 battery, a charger, bushings from DCE1513 - DCE1522, and a convenient kit box.
This cable stripper comes with some great features. The depth gauge ensures uniform stripping up to 4 feet. It can strip cables from #6 to 750 MCM of both copper and aluminum. Quick - release bushings let you switch bushings for different cable sizes in a flash. The variable - speed trigger with reverse gives you better control. The adjustable onboard LED light helps you work in dim or dark areas. The kit box offers smart storage for the tool, bushings, battery, and charger. The E - Clutch™ system keeps you in control if the tool gets jammed. It uses DEWALT bushings and is also compatible with Greenlee and Ripley bushings.
Specifications include a 20V MAX* voltage, a tool height of 6.95 inches, a length of 10.39 inches, and a weight of 2.4 lbs. It can handle THHN copper cables, with a copper cable capacity range of 6 AWG to 750 MCM and an aluminum cable capacity range of 5 AWG to 900 CM. It also has a strip depth of 4 feet and an LED light.
Using the DeWalt DCE151TD1 Cordless Cable Stripper is easy. First, refer to the reference chart to select the appropriate bushing for your cable size. It's a good idea to have the sizes above and below the recommended one on hand. Once you've chosen the bushing, insert it into the cable stripper.
Next, connect the 2 Ah DCB203 battery to the tool. Make sure the battery is fully charged before you start. Then, place the cable you want to strip into the stripper. Use the depth gauge to set the correct stripping depth, up to 4 feet.
Press the variable - speed trigger. You can adjust the speed according to your needs, and use the reverse function if necessary for better control. The onboard LED light can be adjusted to help you see in dark or low - light areas.
When you're done, turn off the tool and remove the stripped cable. Store the tool, battery, charger, and bushings in the convenient kit box.
Here are some important notes. Always wear appropriate safety gear, like gloves and safety glasses, when using the cable stripper. Don't force the tool if it gets jammed. The E - Clutch™ system is there to help you maintain control, but it's best to troubleshoot the jam carefully.
For maintenance, keep the tool clean. Wipe it down after each use to remove any debris. Check the battery regularly and charge it as needed. Inspect the bushings for wear and tear, and replace them if necessary. This will ensure your DeWalt DCE151TD1 Cable Stripper lasts a long time and works at its best.
