Bosch HS1517 3/4 Hex Shank 1 x 12 Flat Chisel

Using the Bosch HS1517 flat chisel is easy. First, make sure your 3/4 hex demolition tool is turned off and unplugged. Insert the 3/4-inch hex shank of the chisel into the tool's chuck and tighten it securely. When you're ready to start, hold the tool firmly with both hands and position the chisel at the right angle on the brick or concrete surface. Then, turn on the tool and start chiseling or breaking. For safety, always wear safety goggles and gloves to protect yourself from flying debris. When not in use, store the chisel in a dry place to prevent rust. If it gets dirty, clean it with a dry cloth. This will keep your Bosch HS1517 in good condition for a long time.