DeWalt D24000S Heavy-Duty 10 Wet Tile Saw with Stand

Using the DeWalt D24000S wet tile saw is a breeze. First, set up the folding stand and place the saw on it. Fill the 5 - gallon water pan with water. Adjust the dual water nozzles to ensure optimal water flow on the blade. This will help reduce over - spray and mist. For straight cuts, use the cantilevering rail/cart system. It offers a 24 - inch ripping capacity. When you need to cut tiles diagonally, it can handle up to 18 - inch tiles. If you need angled cuts, use the integrated 45/22.5° miter feature. The plunge feature comes in handy when you need to make cuts for electrical outlets or A/C registers. Just lower the blade into the tile at the right spot. The edge guide with a 2 - position 45 - degree guide makes it easy to line up corner cuts. As for maintenance, after each use, remove the cutting cart and clean it. Check the water pan and make sure it's clean too. Keep the saw in a dry place. Also, make sure to check the blade regularly for wear and tear. If the blade is dull, replace it for better cutting performance. Always follow safety guidelines, wear appropriate safety gear like goggles and gloves, and make sure the saw is unplugged when not in use or when performing maintenance.