The DeWalt DCK299P2 kit is a must - have for any DIY enthusiast or professional. Here's what's included: a DCD996 20V MAX* XR 3 - Speed 1/2' Hammer Drill, a DCF887 20V MAX* XR 1/4' Impact Driver, two DCB205 20V MAX* XR High - Capacity Li - Ion Batteries (5.0Ah), a charger, two belt hooks, a 360° side handle, and a kit box. The DCD996 hammer drill is a high - performance tool. It has three speeds (0 - 2,250 rpm) and an all - metal transmission that speeds up applications and extends run - time. Its compact (8.4' front - to - back length) and lightweight (4.7 lb) design allows it to reach tight spots. With 0 - 38,250 BPM, it drills through masonry materials quickly. The 3 - Mode LED provides light in dark or confined areas, up to 20X brighter than the previous model. The DCF887 impact driver offers 1,825 in - lbs of max torque at a fast 0 - 3,250 RPM and 0 - 3,600 impacts per minute. Its compact (5.3' front - to - back length) and lightweight (3.4 lbs) design makes it easy to handle. The system runs on 20V MAX power.
Using the DeWalt DCK299P2 kit is a breeze. To use the hammer drill, first, make sure the battery is fully charged and inserted properly. Select the right drill bit for your task and adjust the speed according to the material you're working on. For the impact driver, choose the appropriate socket or bit, and it's ready to drive screws and bolts efficiently. When using these tools, always wear safety goggles and gloves to protect yourself from flying debris. Don't use the tools in wet conditions to avoid electrical hazards. For maintenance, after each use, wipe down the tools with a clean, dry cloth to remove dust and debris. Check the battery regularly and store it in a cool, dry place. If the tool gets jammed, turn it off immediately and carefully remove the object causing the jam. This way, your DeWalt DCK299P2 kit will serve you well for a long time.
