Using the Bosch GSR18V-755CN drill/driver is easy. First, make sure you have a compatible 18V battery (sold separately) and insert it into the tool. Then, choose the right bit for your job and insert it into the all-metal chuck. You can adjust the speed settings according to your needs - use the high-speed setting (0 - 2,100 rpm) for fast drilling and the high-power setting (0 - 480 rpm) for tougher tasks. The 25+1 precision clutch helps you control the torque and prevent fastener damage. When using the tool, hold it firmly with the side-assist handle to prevent slipping. If you install the optional Connectivity Tool Module, you can connect the tool to the Bosch Toolbox app on your device for more control and feedback. Remember to always wear safety gear like goggles and gloves. For maintenance, keep the tool clean and dry. After each use, wipe it down with a clean cloth. If the tool gets dirty, you can use a mild detergent to clean it, but make sure it's completely dry before using it again. Also, check the battery regularly and charge it when needed. Avoid overloading the tool to protect the motor and battery. If you have any problems, refer to the user manual or contact Bosch customer service.
