Using the Bosch GTB18V-45B15 is a breeze. First, make sure the battery is fully charged. Insert the battery into the screwgun. You can easily control the tool with your thumb and index finger thanks to its well - balanced grip. When you're ready to start driving screws, place the bit on the screw and press down. The Xtend Drive feature will activate the motor only when it senses pressure. Adjust the variable - speed control according to the material you're working on. For softer materials, a lower speed might be better, while harder materials may need a higher speed. When you need to reverse a screw, use the forward/reverse rocker switch. There's no need to remove the cone on the tool because of the retractable depth gauge. As for maintenance, keep the tool clean after each use. Wipe it down with a dry cloth. Don't expose the battery to extreme temperatures. If you're not using the tool for a long time, store the battery separately and charge it every few months to keep it in good condition. And always make sure to use the provided charger to charge the battery.
