Using the Makita GAU01M1 pole saw is quite straightforward. First, make sure the battery is fully charged. Insert the 40V max XGT® 4.0Ah battery into the tool. Before you start cutting, check the chain tension. You can use the lateral chain tensioner with a single stud to adjust it. Also, fill the translucent bar oil tank with the appropriate bar oil through the large opening. When you're ready to cut, hold the pole saw firmly and position it near the branch you want to trim. Press the trigger to start the motor. The 8 - foot length allows you to reach high branches easily. If the saw gets stuck and the attachment's rotation suddenly stops, the Active Feedback - Sensing Technology (AFT®) will turn off the motor to protect it. For maintenance, after each use, clean the saw to remove any debris. Check the chain for wear and sharpen it using the included chain saw file. Make sure to keep the bar oil tank filled to keep the bar and chain lubricated. Store the saw in a dry place. The XGT® Rapid Charger has a digital display that shows the battery charge level. When charging, the dual - fan design will cool the battery and circuit board quickly. Always follow the safety instructions provided with the tool to ensure safe operation.
