The Makita GPS01M1J 40V max XGT 6-1/2 inch plunge circular saw kit is a game-changer for woodworkers and DIY enthusiasts. When paired with an optional guide rail system (sold separately), it offers extremely precise and accurate cutting. The saw and rail work in harmony to produce clean cuts with hardly any tear - out. Powered by a robust Makita - built brushless motor with Automatic Speed Change™ Technology, it adjusts cutting speed and torque during operation for top - notch performance. With a variable speed control dial (2,500 – 4,900 RPM), soft start, and an electric brake, it provides added convenience. The constant speed control ensures a smooth finish even under load. It has a large cutting capacity of 2 - 3/16 inches at 90 degrees and 1 - 1/2 inches at 48 degrees, and a bevel capability from - 1° to 48° with positive stops at 22.5° and 45°.For enhanced efficiency, this saw can wirelessly start a connected dust management solution. The Auto - start Wireless System (AWS®) uses Bluetooth® technology to enable wireless communication between the tool and the dust extractor (sold separately). When you engage the trigger of the AWS - equipped GPS01Z, the dust extractor powers on, and it powers off when the trigger is released. This intelligent system gets rid of cords and reduces excessive noise. An AWS transmitter (sold separately) is required. The XGT system, which includes equipment, tools, batteries, and chargers using 40v max lithium - ion batteries, is engineered for high - power, high - demand applications, allowing for a cordless job site. It features advanced motor engineering, intelligent digital communication, and excellent durability.The kit includes a 40V max XGT 4.0Ah Battery (BL4040), a 40V max XGT Rapid Optimum Charger (DC40RA), a 6 - 1/2' 56T C.T. Cordless Plunge Saw Blade for wood, MDF, and laminate (B - 57342), a hex wrench (783203 - 8), a small interlocking case (821549 - 5), and an X - large interlocking case (821552 - 6). The saw offers many great features such as a powerful brushless motor for fast cutting, digital communication for optimized performance and long - lasting power, and protection against overload, over - discharge, and overheating. It also has a large rear dust port, a built - in depth stop, and a convenient on - board hex wrench. It's perfect for cutting various materials including large wood panels, melamine, MDF, aluminum, and Corian® with the right blades (wood blade included, other blades sold separately).
Using your Makita GPS01M1J plunge circular saw is easy. First, make sure your 40V max XGT 4.0Ah battery is fully charged using the included rapid optimum charger. If you're using the optional guide rail system, attach it securely. Before starting your cut, set the desired cutting depth and bevel angle. You can use the variable speed control dial to adjust the cutting speed according to the material you're cutting. Just squeeze the trigger to start the saw. For added convenience, if you have the AWS - enabled dust extractor and the AWS transmitter, the dust extractor will start and stop automatically with the saw. When changing the blade, use the locking lever to hold the blade in place and insert the included hex wrench through the hole in the blade case. As for maintenance, after each use, clean the saw and the dust port to keep it in good working condition. Store the saw in one of the included interlocking cases to protect it. Make sure to keep the battery in a cool, dry place. Always follow safety instructions, wear appropriate safety gear like goggles and ear protection, and don't use the saw if it's damaged.
