This DeWalt kit is a powerhouse for professionals tackling tough fastening and drilling jobs on the worksite. Here's what's inside: a DCD805 20V Max XR® Brushless Cordless 1/2 - inch Hammer Drill/Driver, two DCB203 20V Max 2Ah Lithium - Ion batteries, a DCB112 charger, a handy belt hook, and a convenient kit bag.
Key Features:
- **Reach Tight Spots**: At just 7 inches, it's half an inch shorter than the DCD796 (tool head only), allowing you to access those hard - to - reach work areas with ease.
- **Great Bit Hold**: The 1/2 - inch metal ratcheting chuck ensures high bit retention, so your bits stay firmly in place.
- **Top - Notch Speed and Control**: With a high - speed transmission, variable trigger, and two speed settings (0 - 650/0 - 2,000 rpm), you get professional - level speed, control, and precision.
- **Light Up the Dark**: The adjustable 3 - Position, 3 - Mode LED with up to 70 Lumens brightens dark work areas. The LED spotlight mode even has a 20 - minute shutoff function for longer work in low - light.
- **Enhanced Performance**: It's designed for optimal performance and runtime, helping you get more work done.
- **Smart Tool Management**: The drill/driver's chip pocket can accept the Tool Connect™ chip DCE042 (sold separately) and connect with the Tool Connect™ Site Manager app for seamless worksite asset management.
Specifications:
- Chuck Size: 1/2 inch
- Voltage: 20V
- Blows per Minute (BPM): 34000
- Drill/Driver Type: Hammer Drill
- Maximum Speed (RPM): 2000 RPM
- Battery System: 20V Max
- Battery Type: Lithium Ion
- Battery Voltage: 20V
- Battery Amp Hours: 2 Ah
- Motor Type: Brushless
- Power Tool Features: Keyless Chuck, LED Light, Variable Speed
- Chuck Type: Keyless
- Color: Yellow/Black
- Weight: 2.95 lbs
- Country of Origin: Mexico
This 20V MAX* XR® Brushless 1/2 - inch Hammer Drill/Driver is built for durability. Its powerful brushless motor quickly drives fasteners into thick materials. The integrated hammer mode lets you speed through masonry drilling with up to 34,000 bpm. Being lightweight and well - balanced, it's perfect for working in tight spaces for long periods. The 3 - position, pivoting LED with 3 mode settings and up to 70 Lumens enhances visibility in dimly lit areas.
Using your DeWalt 20V Max XR Brushless Cordless 1/2 Inch Hammer Drill and Driver is easy. First, make sure the battery is fully charged and inserted correctly into the drill. Select the appropriate speed setting based on your task - use the lower speed (0 - 650 rpm) for driving screws and the higher speed (0 - 2,000 rpm) for drilling holes. When using the hammer mode for masonry work, press firmly on the drill to activate the hammer function. To change bits, simply use the keyless chuck to loosen and tighten.
Here are some important notes. Always wear safety goggles and gloves when operating the drill. Avoid using the drill in wet or damp conditions. If you're not using the drill for a while, remove the battery to prevent over - discharge.
For maintenance, keep the drill clean by wiping it down after each use. Check the chuck regularly for any debris or damage. If the LED light isn't working properly, make sure it's not blocked. Store the drill in the provided kit bag in a dry place. And if you're using the Tool Connect™ feature, keep the app updated for the best performance.
