Using the Makita GMH01M1 is straightforward. First, charge the 40V max XGT® 4.0Ah battery with the included rapid charger. Once charged, insert the battery into the hammer. You can adjust the speed using the variable speed dial according to the task at hand. If you have an AWS - capable dust extractor and the AWS transmitter, pair them with the hammer for automatic on - off control. When using the hammer, hold it firmly with the side handle, which can be swiveled 360° for better maneuverability. For safety, always wear appropriate protective gear like goggles and gloves. Also, make sure the work area is well - lit; you can use the built - in LED light if needed. Regarding maintenance, clean the hammer regularly, especially after working in dusty conditions. Apply the included grease to keep the moving parts lubricated. Check the battery's charge level and avoid over - discharging it. Store the hammer in the provided tool case when not in use to protect it from damage.
