The Milwaukee 2455 - 20 M12 No - Hub Driver is a high - performance cordless tool. With a 12V voltage, it offers two no - load speed settings of 0 - 250/0 - 750 RPM. The 1/4 Hex chuck type ensures easy bit changes. It comes with torque settings of 60 in - lbs. and 80 in - lbs., ideal for fast and accurate installation of no - hub couplings. This driver features a drill mode, an on - board fuel gauge, LED light, LED torque indicator, and LED calibration indicator. The lithium - ion battery (not included) allows it to fasten up to 300 steel clamps on a single charge. Weighing only 2.35 lbs (2.75 lbs with battery attached, battery sold separately), its compact and lightweight design reduces user fatigue. The auto shut - off with LED indicator alerts you when the torque limit is reached, and the LED calibration indicator reminds you to calibrate after 25,000 cycles. It's the first of its kind in the industry, providing accuracy and repeatability for no - hub coupling installation.
Using the Milwaukee M12 No - Hub Driver is straightforward. First, if you want to use it, make sure you have a compatible lithium - ion battery (sold separately) and insert it properly. When you're ready to work, select the appropriate torque setting (60 or 80 in - lbs) according to your needs. This will help you install no - hub couplings quickly and accurately. In drill mode, which has a speed of 0 - 750 RPM, you can use it for general drilling and fastening tasks. Pay attention to the LED indicators. The torque indicator will let you know when you've reached the set torque limit, and the calibration indicator will tell you when it's time to calibrate after 25,000 cycles. After use, remove the battery to avoid over - discharging. Store the tool in a dry and clean place. Wipe it down regularly to keep it in good condition. If you notice any issues, it's best to have it checked by a professional.
