DeWalt DCH293R2DH 20V MAX XR Brushless 1-1/8 SDS Plus Rotary Hammer Kit with Dust Collection

The DeWalt DCH293R2DH rotary hammer kit is a high - performance cordless tool for masonry work. It offers corded - like power with 3.5 joules of impact energy, all without the hassle of a cord. The E - Clutch provides excellent control when the tool gets bound up. The SHOCKS Active Vibration Control System® cuts down on the vibration you feel at the handles, protecting you during long - term use. Powered by a DEWALT - built brushless motor, it runs all day and is super durable. Its German - engineered hammer mechanism guarantees top - notch quality. The dust management solution meets Table 1 standards. The clear and tough dust box lets you easily see when it needs emptying. You can drill holes up to 1 inch in diameter, 8 inches deep. It fits into tight spots like on scissor lifts or between pipes and ducts. The replaceable dust nozzle makes it easy to switch to a new one. Specifications include 0 - 4480 BPM, SDS+ chuck type, dust collection ready, 3.5 joules of impact energy, 0 - 1000 RPM no - load speed, optimal concrete drilling from 5/8 - 7/8 inches, and a 20V MAX* system. This tool is great for large - diameter hole drilling and installing anchors, and comes with an OSHA 1926.1153 - compliant Dust Box Assembly with a filter cleaning mechanism and a HEPA filter that removes 99.97% of airborne particles 0.3 microns or larger.

Using the DeWalt DCH293R2DH is straightforward. First, make sure the battery is fully charged. When you're ready to drill, select the right drill bit for your job. The tool can handle bits up to 1 inch in diameter and 8 inches in usable depth. Press the trigger gently to start the drill, and it'll start spinning and hammering. For dust collection, the built - in system works automatically as you drill. Keep an eye on the clear dust box, and when it's full, empty it to keep the dust collection working well. When you're in a bind - up situation, the E - Clutch will give you better control. Be careful not to put too much pressure on the tool, as it has a powerful motor and hammer mechanism. To maintain your tool, after each use, wipe it down to remove any dust or debris. You can replace the dust nozzle when it gets worn out. Also, check the filter in the dust box regularly and clean it according to the instructions. This will keep the tool running smoothly and ensure it lasts a long time.