DeWalt DWE575SB 7-1/4 Lightweight Circular Saw with Electric Brake

Using the DeWalt DWE575SB circular saw is straightforward. First, make sure the saw is unplugged. Install the 7 1/4 - inch carbide - tipped blade using the included blade wrench. You can store the wrench on - board for easy access. Plug in the saw and turn it on. Adjust the bevel angle up to 57° with stops at 45° and 22.5° according to your cutting needs. You can also set the depth of cut as required. When you start cutting, the integrated dust blower will help keep your line of sight clear. Once you release the trigger, the electric brake will stop the blade quickly. Safety first! Always wear safety goggles and gloves when using the saw. Don't use the saw if it's damaged. For maintenance, keep the saw clean after each use. Wipe off any dust or debris. Check the cord regularly for any signs of wear and tear. Thanks to the patented tough cord protection system, it's quite durable, but still, be careful not to pull the cord too hard. Store the saw in the included contractor bag when not in use to protect it from damage.