The DeWalt DCH263R2DH 20V MAX* XR® Brushless 1-1/8 in. SDS Plus D-Handle Rotary Hammer Kit with onboard dust extraction is a lightweight, low-vibration, high-performance drill tailored to today's contractors. Its durable three-mode German-engineered mechanism packs 3.0 joules of impact energy, offering the fast application speed pros need. This allows the hammer to work quickly in chipping tasks and has an ideal drilling range from 1/4 in. to 3/4 in. The kit comes with a 6.0 Ah DCB206 battery pack for long runtime. The SHOCKS-Active Vibration Control® system cuts down on the vibration you feel at the handles compared to hammers without it. With its powerful mechanism, fast drilling speed, long battery life, and well-balanced design, it's great for all-day use, even for large-diameter hole drilling in tough concrete. The DCH263R2DH features the OSHA Table 1 Compliant DWH205DH dust extraction system. It has a strong built-in motor for better suction and high-performance drilling. The two-second power-off delay keeps dust extraction going after you turn off the drill. The DWH205DH has three nozzle heads for maximum dust collection. The included nozzles are suitable for bits up to 1 in. in diameter, all stop bits up to 1.5 in. at the shoulder, and small bits up to ½ in. It can handle bit lengths up to 10 in. for drilling. This lets you install various anchors like pinch nails, dropins, large-diameter sleeves, stud/wedge, and screw anchors. The unit comes with an OSHA 1926.1153-compliant Dust Box Assembly, equipped with a filter cleaning mechanism and a HEPA filter that removes 99.97% of airborne particles 0.3 microns or larger. The kit includes a 20V MAX* XR® Brushless 1-1/8' D-Handle SDS Plus Rotary Hammer, a low-vibration side handle, a depth rod, two 6.0AH 20V batteries, and a high-speed charger. Key features include corded power without the cord, a wide drilling range, a factory-set clutch to reduce torque reactions, an ergonomic design for great drilling and chipping in different orientations, constant speed under load, a bright LED for dark areas, reduced vibration, three optimized dust nozzle heads, bit lengths up to 10 in., quick release for easy assembly, a compact design, a durable dust box with a HEPA filter, an adjustable depth stop, and an LED on the dust extractor for low-light work.
Using the DeWalt DCH263R2DH is easy. First, charge the 6.0AH 20V batteries with the high-speed charger. Then, insert the battery into the hammer. You can attach the low-vibration side handle for better control. When drilling, select the appropriate bit according to your needs. The adjustable depth stop helps you drill holes to the right depth. The dust extraction system works automatically. Just make sure the dust box is properly installed. After use, turn off the drill, and the dust extraction will continue for two seconds to collect any remaining dust. For maintenance, regularly clean the dust box and use the filter cleaning mechanism to keep the HEPA filter working well. Check the tool for any signs of damage before each use. If the bit jams, the factory-set clutch will reduce the sudden high-torque reaction. Store the tool in a dry place when not in use. Don't use the tool in wet conditions to avoid electrical hazards. Also, always wear appropriate safety gear like goggles and gloves when operating the hammer.
