Using the Fluke 714B Thermocouple Calibrator is easy. First, insert the AA batteries into the device. Then, connect the test lead sets and alligator clip sets as needed for your measurement. To measure different thermocouple types or millivolts, simply select the appropriate function on the device. When measuring 4 to 20 mA signals while sourcing a temperature signal, make sure the connections are correct. You can use the hanging tool to keep the device in a convenient position. The linear ramp and 25% step auto - ramp features are based on 0% and 100% settings, so adjust these settings according to your requirements. The dual inputs and backlit display will help you easily read the measurements. After use, turn off the device. Remember, the power - down settings are saved, so you can quickly resume your tests next time. Keep the device in a dry and clean place. Don't expose it to extreme temperatures or moisture. Periodically check the calibration certificate to ensure the accuracy of the device. If you have any problems, refer to the user manual or quick reference guide.
