Product Detail
Features:
- Ideal for torque wrench inspection in production workshops.
- Automatically shows the percentage error between measured and set values, no manual calculation required.
- Boasts an accuracy of +/- 1%.
- Offers 4 torque measurement units - ft/lb, in/lb, Nm, and Kg/cm.
- Comes with 3 modes: track, peak, and first.
- Allows data upload via USB interface.
- Backlit display for easy use in dim work environments.
- Operates on either a continuous AC connection or a built-in Li-ion battery.
- 10-minute auto-shutdown feature to save battery life.
- Can be securely fixed to a workbench or base plate using 4 screw bolts.
Specifications:
- Meets or exceeds ASME standards.
- 1/2-inch square drive tang.
- Painted steel finish.
- Maximum torque: 135.6 Nm (Alt Scale) and 100 ft/lb (Primary Scale).
- Minimum torque: 13.6 Nm (Alt Scale) and 10 ft/lb (Primary Scale).
- Torque accuracy of +/-1% clockwise from 20 - 100% of full range.
- 90-day calibration and 1-year parts warranty.
These bench testers are perfect for on-the-spot use. They can be mounted on a bench or stand. The compact and durable design features a backlit screen, and a rechargeable battery is included.
Using your GearWrench 89633 torque tester is straightforward. First, decide if you'll use the AC power or the built - in Li - ion battery. If you're using the battery, make sure it's charged. Once powered on, select your preferred torque measurement unit from ft/lb, in/lb, Nm, or Kg/cm. You can then choose one of the three modes: track, peak, or first, depending on your testing needs. To inspect a torque wrench, simply connect it to the tester and start the measurement. The tester will automatically show the percentage error between the measured and set values. When you're done, if you don't use it for 10 minutes, it will automatically shut down to save battery life. Remember, this tester meets or exceeds ASME standards, so you can trust its accuracy. For maintenance, keep it clean and dry. If you notice any issues, refer to the 90 - day calibration and 1 - year parts warranty for support. And make sure to use the 4 screw bolts to securely fix it to a workbench or base plate when in use.
