The Bosch GAM 220 MF Digital Angle Finder is an all - in - one tool, combining the functions of an angle finder, miter calculator, protractor, and level. It comes with a well - designed package that includes one angle finder, four AA batteries, a 16 - inch leg extension, and a handy carrying case. This angle finder offers great features. Its illuminated, rotating flip display makes it a breeze to read measurements. You can measure angles from 0 to 220°. The leg extension provides extra reach, and there's a manual leg lock to keep the angle in place for repeated use. It also stores angle measurements in memory, so you can get consistent results across different job areas. With easy field calibration, you're always guaranteed accurate readings. The robust housing has IP 54 protection, making it suitable for tough working conditions. The angle accuracy is 0.01', and it has an automatic shut - off after 30 minutes to save battery. The compound cut input angle ranges from 0 to 180°. This tool is a must - have for carpenters, remodelers, and contractors.
Using the Bosch GAM 220 MF Digital Angle Finder is easy. First, make sure you insert the four AA batteries provided. To measure an angle, simply place the tool on the surface where you need to measure. The illuminated, rotating flip display can be adjusted to a position that's easy for you to read. If you need to use the same angle in multiple places, store the measurement in the memory. The manual leg lock helps you keep the angle fixed when you reposition the tool. When doing miter or compound cuts, use the clearly labeled buttons for calculations. For best results, calibrate the tool regularly in the field. As for maintenance, keep the tool in the carrying case when not in use to protect it from dust and damage. The IP 54 protection means it can handle some dust and splashes, but avoid submerging it in water. Replace the batteries when the automatic shut - off starts to occur too soon. This will ensure your angle finder stays accurate and reliable for a long time.
