Makita DS4012 1/2 Corded Spade Handle Drill

Using the Makita DS4012 drill is a breeze. First, pick the right bit for your job and use the on - board chuck key to secure it in the 1/2' drill chuck. You can adjust the speed from 0 to 600 RPM depending on the material you're working with. For example, use a lower speed for mixing drywall mud and a higher one for drilling in wood. The forward and reverse lever makes it easy to change the drill's rotation direction. When using the drill, hold it firmly by the D - handle, which can rotate 360° to find the most comfortable position. And don't forget, this drill is double - insulated, so you can work with confidence. As for maintenance, keep the drill clean after each use. Wipe off any dust or debris, especially from the chuck and the motor area. Store it in a dry place to prevent rust. Also, check the all - ball bearing construction periodically to make sure it's in good condition. If you need to change bits, the on - board chuck key storage allows for quick and easy bit swaps. Always use the drill within its capacity limits, 1/2' in steel and 1 - 1/2' in wood, to avoid damaging the tool.