Using the Aervoe Z469 Hunter Green Zynolyte Speed Enamel Spray Paint is easy. First, make sure the surface you're painting is clean and dry. Shake the aerosol can well for about a minute before starting to spray. Hold the can about 8 - 10 inches away from the surface and spray in a steady, sweeping motion. Apply thin, even coats for the best results. Remember, it dries to the touch in 15 minutes and you can handle it after 30 minutes, but it takes 72 hours to fully cure. When using this paint, work in a well - ventilated area due to the ketone odor. Store the can at a temperature between 50°F and 120°F (10°C to 49°C). Avoid using it outside the operating temperature range of 60°F to 80°F (16°C to 27°C). To keep the paint in good condition, always make sure the can is tightly closed after use. This paint can cover about 26 square feet per can, so plan your project accordingly.
