The Condux 08917275 Swivel Head Power Pulling Eye is an outstanding hybrid tool. It combines the best features of standard reusable power pulling eyes and Condux swivels, delivering top - notch performance. The swivel head is a game - changer as it stops the cable from twisting and binding during installation. When you're installing single cables into individual conduits or multiple cables into a single conduit, you don't need a separate swivel for each pulling eye. Each unit comes with a swivel head, a sleeve nut, and a plug. It's reusable and fits all Condux pulling harnesses. With a part number of 08917275, it's designed for a 750 kcmil cable. The brown color gives it a distinct look. It has a max conductor diameter of 0.998 in. (25 mm), a max eye OD (A) of 1.75 in. (44 mm), a slot width (B) of 0.63 in. (16 mm), a slot depth (C) of 1.59 in. (40 mm), a pin diameter (D) of 0.56 in. (14 mm), and a pin center (E) of 0.78 in. (20 mm). The replacement plug part number is 08917223, and it has a load rating of 10,000 lbs (4,536 kg).
Using the Condux 08917275 Swivel Head Power Pulling Eye is straightforward. First, attach the pulling eye to the cable you want to install. Make sure the cable fits well within the slot and is properly secured. When pulling, the swivel head will automatically prevent the cable from twisting and binding, which makes the installation process much smoother. As for maintenance, after each use, clean the pulling eye with a dry cloth to remove any dirt or debris. Check the swivel head to ensure it rotates freely. If you notice any signs of wear or damage, replace the plug using the replacement part 08917223. Always keep in mind the load rating of 10,000 lbs (4,536 kg). Don't exceed this limit to avoid any safety issues. And since it's reusable, take good care of it, and it will serve you well for many cable - pulling projects.
