Bosch MRF23EVS 2.3 HP Electronic VS Fixed-Base Router with Trigger Control

FEATURES: • High-speed performance: Runs at 10,000 - 25,000 RPM with a powerful 2.3 HP motor for tough tasks. • Enhanced control: Trigger power switch in the handle gives you better command over the tool. • Versatile depth adjustment: Offers a 1 - 5/8' continuous micro - fine adjustment range. Use the wrench for easy adjustments through the top of an optional router table. • Improved visibility: Always - on LED lighting illuminates the bit area. • Precision cutting: Precision centering design helps you keep the bit on the cutline when using jigs, templates, dovetail fixtures, etc. • Quick conversion: Two - stage quick clamp system allows for fast, tool - free conversion. • Smooth start: Soft - start function reduces start - up torque. • Customizable speed: Variable speed dial lets you match the speed to the workpiece and task. SPECIFICATIONS: • Amperage: 15 • Base Diameter: 6' Fixed • Base Opening: 3 - 3/4' • Collet Capacity: 1/2' and 1/4' • Cord Length: 10' ft. (3 m) • Fixed - Base Depth Range: 1 - 5/8' • Max. Motor HP: 2.3 HP • No Load RPM: 10,000 - 25,000 • Rating: 120V AC • Subbase Opening: 2'

Using the Bosch MRF23EVS router is easy. First, choose the right collet size (1/2' or 1/4') according to your bit. Then, adjust the depth of the cut. You can use the continuous micro - fine adjustment range for precise settings. If you're using an optional router table, use the wrench to make adjustments through the top. Before starting, turn on the LED light to see the bit area clearly. Use the variable speed dial to set the appropriate speed for your workpiece. When you're ready, hold the handle and press the trigger power switch. The soft - start function will ensure a smooth start. Be careful when using jigs, templates, or dovetail fixtures. The precision centering design will help you keep the bit on the right path. After use, unplug the router. Keep it clean by wiping it with a dry cloth. Check the cord regularly for any damage. Store it in a dry place. If you need to change the base or make other conversions, use the two - stage quick clamp system for a fast, tool - free change.