DeWalt DW618PK 2-1/4 HP EVS Fixed Base / Plunge Router Combo Kit with Soft Start

Dewalt DW618PK Specs: • 12.0 Amps • 2-1/4 HP Power • 8,000 - 24,000 rpm No - Load Speed • 1/2' and 1/4' Collet Diameters • 2-1/2' Plunge Stroke • Depth Stop Micro - fine Ring • 6' Base Dimension • Spindle Lock. Included Items: • Motor pack • DW6184 fixed base • DW6182 plunge base • 1/4' and 1/2' collets • Wrench • Sub - base concentricity gauge • Large hole sub - base • Vacuum adaptor • Heavy - duty kit box. Key Features: • A 2 - 1/4 HP, 12.0 Amp electronic variable - speed motor offers enough power to smoothly rout through tough hardwoods. • Electronic variable speed with full feedback control maintains a constant speed under load from 8,000 - 24,000 rpm. The soft - start feature reduces start - up torque for better control. • The micro - fine depth adjustment ring allows for precise depth adjustments in 1/64' increments and can be vertically adjusted for a consistent switch/cordset position. • An adjustable, tool - free steel motor cam lock enables quick and secure depth adjustment and base changes. • The integral, through - the - column dust collection system captures 95% of the dust and provides excellent bit visibility. • Quick - release motor latches make it easy to remove the motor pack for bit and base changes. • The detachable cordset is serviceable and allows the same motor pack to be used with all bases. • A sub - base concentricity gauge is included to ensure bit concentricity and top - notch accuracy. • Precision - machined brass bushings and case - hardened steel guide rods ensure a smooth and accurate plunge stroke.

Using the Dewalt DW618PK is quite straightforward. First, assemble the router by attaching the base (either fixed or plunge) to the motor pack. Insert the right - sized collet (1/4' or 1/2') and secure your router bit. Adjust the depth using the micro - fine depth adjustment ring for precision. Before starting, make sure the router is set to a low speed and gradually increase it. This helps prevent sudden jolts and gives you better control. When routing, move the router steadily along your workpiece. Keep in mind that the dust collection system is there to help keep your workspace clean, so connect a vacuum to the adaptor. For safety, always wear eye and ear protection. Never touch the bit while the router is running. After use, turn off the router and wait for the bit to stop spinning completely before making any adjustments. To maintain your router, regularly clean the dust collection system to ensure it works effectively. Check the brass bushings and steel guide rods for any signs of wear and lubricate them as needed. Also, inspect the cordset for any damage. With proper use and maintenance, your Dewalt DW618PK will serve you well for a long time.